- Drawing
- Specification
| MODEL | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (ºC) |
Operating Pressure kgf-cm2 (bar) | VACUUM (Torr) |
Dimension (mm) |
Weight (kg) |
||||||
| WATER | AIR | STEAM | LIGHT OIL | GAS | L | H | D | |||||||
| US-6 | 1/8" | 0.23 | 2.5mm | -5ºC~+185ºC | 0~7 | 0~7 | 0~10-3 | 41 | 66 | 21.5 | 0.32 | |||
| US-8 | 1/4" | 0.23 | 2.5mm | -5ºC~+185ºC | 0~7 | 0~7 | 0~10-3 | 41 | 66 | 21.5 | 0.32 | |||
| US-10 | 3/8" | 0.58 | 4mm | -5ºC~+185ºC | 0~10 | 0~10 | 0~10-3 | 53 | 75 | 48 | 0.54 | |||
- Material
| PARTS | Coil | Tube | Spring | Core | Plug | O-ring | Valve Body |
| MATERIAL | Special Copper Wire (H Class) |
Stainless Steel | Stainless Steel | Stainless Steel | PTFE | PTFE | Forged Brass |
- Description
- US series is direct-acting, conductive, and normally close (NC) 2/2 solenoid valve
- Able to be operated directly without pressure
- Material PTFE is suitable for steam
- Cautions
- Before installation depressurize the piping system and clean internally.
- For the protection of the equipment install a strainer or filter suitable for the service involved in the inlet side as close to the solenoid valve as possible.
- The temperature of steam should not be over 185ºC
- AC voltage tolerance: +/- 10%; DC voltage tolerance: +/- 1%
- All standard solenoid valve MUST be mounted vertically upright.
- Not suitable for fluid as below:
- Liquid status when it is at high temperature; solid status when it is cool.
- Corrosive fluid
- Viscosity over 20cst
- YOU MIGHT BE INTERESTED
